Apam Powder Flocculant Polyacrylamide Fabricant Pam Polymer

Classification:Chemical Auxiliary Agent, CPAM,HPAM,NPAM
CAS No.:25085-02-3
MF:(C3H5NO)n, (C3H5NO)n
EINECS No.:203-750-9
Usage:Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals
Send Inquiry

Apam Powder Flocculant Polyacrylamide Fabricant Pam Polymer
Polyacryamide Crystals Cation
Powder or Liquid
Lead Time
7-10 Work days
Trade Terma
Shelf Life
Two years

Product Details

The application of PAM in the water treatment industry mainly includes three aspects: raw water treatment, sewage treatment and industrial water treatment. In the raw water treatment, PAM is used together with activated carbon, etc., and can be used for coagulation and clarification of suspended particles in domestic water; in sewage treatment, PAM can be used for sludge dewatering; in industrial water treatment, it is mainly used as a formula. In the raw water treatment, the organic flocculant PAM is used instead of the inorganic flocculant, and the water purification capacity can be increased by more than 20% even if the sedimentation tank is not modified. Large and medium-sized cities use PAM as a supplement when water supply is tight or water quality is poor. In wastewater treatment.

Product Details

In oil exploitation, it is mainly used in drilling mud materials and improving oil recovery rate. It is widely used in oilfield mining operations such as drilling, completion, cementing, fracturing and enhanced oil recovery, with viscosity increasing, fluid loss and rheology. Adjustment, gelation, splitting, profile adjustment and other functions. At present, China’s oilfield exploitation has entered the middle and late stages. In order to improve oil recovery, it mainly promotes polymer flooding and ternary composite flooding technology. By injecting polyacrylamide aqueous solution, the oil-water flow rate ratio is improved, and the crude oil content in the produced product is increased. The application of foreign polyacrylamide in oilfield is not much.

PAM is widely used as a residence agent, filter aid, leveling agent, etc. in the papermaking field. Its function is to improve the quality of the paper, improve the dewatering performance of the slurry, increase the retention of fine fibers and fillers, reduce the consumption of raw materials and environmental pollution. The effectiveness of use in papermaking depends on its average molecular weight, ionic properties, ionic strength, and activity of other copolymers. Non-ionic PAM is mainly used to improve the filterability of pulp, increase the strength of dry paper, and increase the retention of fibers and fillers; anionic copolymers are mainly used as dry and wet enhancers and residence agents for paper; cationic copolymers are mainly It is used for papermaking wastewater treatment and filtration, and it also has a good effect on increasing the retention of filler.

In the textile industry, PAM, as a sizing agent and finishing agent for fabric post-treatment, can produce a soft, crease-resistant, mold-resistant protective layer. With its strong hygroscopic characteristics, it can reduce the breaking rate when spinning spun yarn; PAM can be used as post-treatment agent to prevent static electricity and flame retardant of fabric; when used as printing and dyeing auxiliary, it can make product adhesion fastness and vividness High, it can also be used as a non-silicon polymer stabilizer for bleaching.


1) For sludge dewatering According to the nature of the sludge, the corresponding model of this product can be selected, which can effectively carry out sludge dewatering before the sludge enters the pressure filtration. When dewatering, the flocculation is large, the non-stick filter cloth is not used, and the filter is not Dispersed, the mud cake is thicker, the dehydration efficiency is high, and the moisture content of the mud cake is below 80%.

2) It is used for the treatment of domestic sewage and organic wastewater. The product is positive in the compound or alkaline medium, so that the sewage with suspended charge in the sewage is flocculated and precipitated, and the clarification is very effective. Such as the production of grain alcohol wastewater, papermaking wastewater, municipal wastewater treatment plant wastewater, beer wastewater, MSG wastewater, sugar wastewater, high organic content wastewater, feed wastewater, textile printing and dyeing wastewater, etc., with cationic polyacrylamide than with anions, The effect of nonionic polyacrylamide or inorganic salts is several times or several times higher, because such wastewater is generally negatively charged.

3) The flocculant used for the treatment of tap water with river water as the water source, the dosage is small, the effect is good, the cost is low, especially the combination with the inorganic flocculant is better, it will become the tap water for treating the Yangtze River, the Yellow River and other river basins. The factory’s high-efficiency flocculant.

4) Reinforcing agents for papermaking and other auxiliaries. Improve the retention rate of fillers, pigments, etc., and the strength of paper.

5) Used in oilfield additives, such as clay anti-swelling agents, thickeners for oil field acidification.

6) It is used for textile sizing agent and slurry, with stable performance, less falling pulp, low fabric breakage rate and smooth surface.

Water Pam Coagulant Powder White Chemicals With OEM Package.


1. Dissolution method

Dissolve the solid particles into an aqueous solution of 1‰–5‰ concentration before use, so as to quickly exert its effectiveness. In the dosing, the gradual dosing method should be adopted, and slowly put into the water to make it evenly dispersed in the water. , dissolved.

2. Addition of dissolved solution

Usually, an aqueous solution of about 0.5 ‰ -1 Torr is added. However, in the case of a high concentration and a high viscosity of the suspension, it is recommended to further dilute the aqueous solution to 0.1 Torr, and it is easy to mix and exert a sufficient effect.

3. The cation has a lower molecular weight than the anion and the viscosity is also weaker than the anion. Therefore, the cation and nonionic ratio concentration standards are slightly higher than the anion. (Depending on the situation, the concentration can be adjusted according to the water concentration. The turbidity is high and the concentration is low. The turbidity is low, the concentration can be increased appropriately. The recommended concentration is 5‰-1%.





1.Are you a Factory?

Yes, we are Factory.

2.How can I get Free samples for testing?

Kindly send us your address, we will send the Free samples to you.

3.How does your factory do regarding quality control?

1.All our products have to be checked strictly before entry warehouse.


2.10-year warranty for quality guarantee.


3.Customer feedback form would be offered for every purchasing order.

4.Do you accept Western Union payment ?

Yes, we do. And L/C or T/T is acceptable too, any mutual agreement payment term.

5.When will i get reply?

We ensure you fast response, fast service.Emails will be replied in 12 hours ,your questions will be answered in time.

6.How was your service?

Our services:24HoursX7DaysX365Days.